MorMe Basic Stroker

MorMe Basic Stroker

MorMe Basic Stroker

The Basic Model Stroker

We wanted to create an affordable Stroker - perfect for those who are new to strokers or aren't quite ready to purchase the Original Model Stroker 2.0.

The Basic Model stroker is visually paired back in comparison to the Original Model, but still functions in exactly the same way.

The Basic Model features the same Single Pour-Dual Density, as well as the same insertion hole design and sizing as the Original Model.

Using suction to provide pleasure, the Basic Stroker features an internal chamber that is pumped to create the desired level of suction. A smooth insertion hole allows for optimum contact with the anatomy.

With 3 insertion hole size options, this stroker is suitable for varied individual growth.

Dimensions

	Weight	Length	Shaft Width	Shaft Circumference
Stroker	100g	12cm	3.5cm	9.5cm

Insertion Hole Width	Hole Circumference	Hole Depth	Chamber Depth
12mm	35mm	55mm	55mm
16mm	45mm	55mm	55mm
20mm	65mm	55mm	55mm

Choose hole size based on individual growth

Available in 5 tones

If you are unsure about which size stroker to go for, or perhaps your budget doesn't quite stretch to the Original Model stroker, it is definitely worth considering going for the Basic Model first, and when you are sure you have the right fit, consider upgrading to the Original Model when the time is right!

Product care/Allergens information

Use warm water and PH neutral soap to clean all parts and allow to air dry. Powder after cleaning with corn starch to prevent tackiness and keep the prosthetic soft.

Use water-based lubricant only (avoid any silicone based products).

The MorMe Basic Stroker will be made to order so please allow for 3-5 working days production time before despatch.

This may vary depending on demand but we will keep you informed of any delays.

Please note that slight variations may be present since each of our prostheses are handmade. We are here to help with any questions or concerns you may have. Please visit our FAQ section for more information.

No Returns or Exchanges will be accepted for the MorMe Stroker range due to the nature of the product.

When your order arrives, please inspect it immediately. Check that the product(s) match your order (correct model, size, skin tone, accessories included) and that there is no visible damage.

If you notice an error (wrong model / size / tone) or missing item, you must contact us at [email protected] within 72 hours of delivery to report the issue.

Select Hole Diameter

Select Tone

From $24.88

Original: $82.94

-70%

MorMe Basic Stroker—

$82.94

$24.88

More Images

MorMe Basic Stroker - Image 2

MorMe Basic Stroker - Image 3

MorMe Basic Stroker - Image 4

MorMe Basic Stroker - Image 5

MorMe Basic Stroker

The Basic Model Stroker

We wanted to create an affordable Stroker - perfect for those who are new to strokers or aren't quite ready to purchase the Original Model Stroker 2.0.

The Basic Model stroker is visually paired back in comparison to the Original Model, but still functions in exactly the same way.

The Basic Model features the same Single Pour-Dual Density, as well as the same insertion hole design and sizing as the Original Model.

Using suction to provide pleasure, the Basic Stroker features an internal chamber that is pumped to create the desired level of suction. A smooth insertion hole allows for optimum contact with the anatomy.

With 3 insertion hole size options, this stroker is suitable for varied individual growth.

Dimensions

	Weight	Length	Shaft Width	Shaft Circumference
Stroker	100g	12cm	3.5cm	9.5cm

Insertion Hole Width	Hole Circumference	Hole Depth	Chamber Depth
12mm	35mm	55mm	55mm
16mm	45mm	55mm	55mm
20mm	65mm	55mm	55mm

Choose hole size based on individual growth

Available in 5 tones

If you are unsure about which size stroker to go for, or perhaps your budget doesn't quite stretch to the Original Model stroker, it is definitely worth considering going for the Basic Model first, and when you are sure you have the right fit, consider upgrading to the Original Model when the time is right!

Product care/Allergens information

Use warm water and PH neutral soap to clean all parts and allow to air dry. Powder after cleaning with corn starch to prevent tackiness and keep the prosthetic soft.

Use water-based lubricant only (avoid any silicone based products).

The MorMe Basic Stroker will be made to order so please allow for 3-5 working days production time before despatch.

This may vary depending on demand but we will keep you informed of any delays.

Please note that slight variations may be present since each of our prostheses are handmade. We are here to help with any questions or concerns you may have. Please visit our FAQ section for more information.

No Returns or Exchanges will be accepted for the MorMe Stroker range due to the nature of the product.

When your order arrives, please inspect it immediately. Check that the product(s) match your order (correct model, size, skin tone, accessories included) and that there is no visible damage.

If you notice an error (wrong model / size / tone) or missing item, you must contact us at [email protected] within 72 hours of delivery to report the issue.

Product Information

Shipping & Returns

Description

The Basic Model Stroker

We wanted to create an affordable Stroker - perfect for those who are new to strokers or aren't quite ready to purchase the Original Model Stroker 2.0.

The Basic Model stroker is visually paired back in comparison to the Original Model, but still functions in exactly the same way.

The Basic Model features the same Single Pour-Dual Density, as well as the same insertion hole design and sizing as the Original Model.

Using suction to provide pleasure, the Basic Stroker features an internal chamber that is pumped to create the desired level of suction. A smooth insertion hole allows for optimum contact with the anatomy.

With 3 insertion hole size options, this stroker is suitable for varied individual growth.

Dimensions

	Weight	Length	Shaft Width	Shaft Circumference
Stroker	100g	12cm	3.5cm	9.5cm

Insertion Hole Width	Hole Circumference	Hole Depth	Chamber Depth
12mm	35mm	55mm	55mm
16mm	45mm	55mm	55mm
20mm	65mm	55mm	55mm

Choose hole size based on individual growth

Available in 5 tones

If you are unsure about which size stroker to go for, or perhaps your budget doesn't quite stretch to the Original Model stroker, it is definitely worth considering going for the Basic Model first, and when you are sure you have the right fit, consider upgrading to the Original Model when the time is right!

Product care/Allergens information

Use warm water and PH neutral soap to clean all parts and allow to air dry. Powder after cleaning with corn starch to prevent tackiness and keep the prosthetic soft.

Use water-based lubricant only (avoid any silicone based products).

The MorMe Basic Stroker will be made to order so please allow for 3-5 working days production time before despatch.

This may vary depending on demand but we will keep you informed of any delays.

Please note that slight variations may be present since each of our prostheses are handmade. We are here to help with any questions or concerns you may have. Please visit our FAQ section for more information.

No Returns or Exchanges will be accepted for the MorMe Stroker range due to the nature of the product.

When your order arrives, please inspect it immediately. Check that the product(s) match your order (correct model, size, skin tone, accessories included) and that there is no visible damage.

If you notice an error (wrong model / size / tone) or missing item, you must contact us at [email protected] within 72 hours of delivery to report the issue.